Rated voltage	24VDC
Operating voltage	21.6~26.4VDC
Rated speed(free load)	3200+/- 10% RPM
Rated current(free load)	0.30A max
Rated load	230mN.m 8inch fan
Rated speed(on load)	1350+/- 10% RPM
Rated current(on load)	1.4A max
Rotation direction	CW(view from shaft side)
Working duty	continuous
Position detection method	Hall element
Insulation resistance	10MΩmin. (500VDC)
Dielectric strength	600VAC/1S leakage current <=5mA
Temperature rise	<65K
Speed control	PWM
Detecting method of motor speed	FG signal

Motor on load speed

Gears

f = 25KHz

Speed(RPM)

360±30

620±30

830±30

1040±30

1240±30

1350±30

Power (W)

2.56

4.69

7.78

13.83

23.25

32.5

Temperature and humidity test (without condensation)	Motor must be left at the temperature range of -20°C to 60°C and the relative humidity range of 5% to 90% for 72 H. and then returns to room temperature 12 hours. Measurement of the rated load speed and rated load current must be conformed to standard.
Vibration test (without packing)	No error should occur after test . Direction of vibration: front and rear, right and left, up and down. Vibration acceleration: 9.8m/s²(sine eave) vibration Frequency range: 50Hz~50Hz~50Hz Repeating period: 1Min Vivrating Time:30cycle(30min) each direction.
Vibration test (packing)	No error should occur after test at the mimimum package test condition. Direction of vibration: front and rear, right and left, up and down. Vibration acceleration:9.8m/s²(sine eave) vibration Frequency range: 50Hz~50Hz~50Hz Repeating period: 1Min Vivrating Time:30cycle(30min) each direction.
Shock test(packaging)	No error should occur after test at the minimum package. Drop height: 50CM Impact shock is applied 1 time for bottom surface.

Drawing:

Application: Stand fan, Oscilating fan

Product Tags:

3 phase dc motor controller

3 phase ac motor controller

Inquiry Cart 0