Guangdong Zhaoli Motor Group Co.,Ltd
Guangdong Zhaoli Motor Co., ltd
Add to Cart
BLDC Motor Industrial Ceiling Fan Motor For 72inch Fan 340VDC Supply With Controller
Brushless Direct Current Motor is a type of energy-saved motor.
| Rated voltage | 340VDC |
| Operating voltage | 155~340VDC |
| Rated speed(on load) | 75+/-5 RPM (high step) |
| Rated power(on load) | 84W |
| Working duty | S1 |
| Insulation resistance | 10MΩmin. (500VDC) |
| Dielectric strength | 1500VAC/1min leakage current <=5mA |
| Speed control | PWM |
| Detecting method of motor speed | FG signal |
| Rated voltage | 120V 60HZ or 240V 50HZ |
| Power | Motor 90W max |
| Character | Vector sine wave control |
| Function | - Through RF(433MHZ) to receive the transmitter signal and control accordingly. - Motor on and off; Motor on load speed; Motor Running time; Motor rotation direction |
| Protection Function | - Soft start: When the controller is powered on, the motor will speed up slowly to the required data. - Over-voltage and under-voltage protection: When the power input to the controller voltage is higher than 270VAC, or less than 70VAC, the controller will turn off the current. - Over-heating protection: When the temperature is higher than 85℃, the motor is turned off or slow down the speed. - Lock protection: When the motor suddenly stops due to the external resistance, the controller will turn off the motor current, and try to restart after a few seconds. If there is no resistance, the motor runs normally; if resistance do not disappear, motor will stop running temporarily and after a few cycles, the power would be cut off completely by the controller. - Over-current protection: Due to external causes, if the motor current increases which exceeds set value, the controller will turn off the motor. - Open-phase protection: If there is no power supply to one of the phases, the motor will be stopped running by the controller. |
Drawing:
Application: Industrial Ceiling fan